ChauffePro · Anderlecht 1070
Remeha boiler service in Anderlecht
ChauffePro assesses Remeha boiler faults, servicing and repair requests in Anderlecht. The exact model, installation condition and compatible parts determine the work required.
Call 0499 00 84 10Request advice or a quote
Identify the appliance before interpreting a fault
Photograph the accessible identification label and display without opening the casing. Provide the model, product reference, full fault message and what still works: heating, hot water or neither. Tell us when the fault occurs and whether it followed an interruption or earlier work.
Fault-code reference and model limits
Tzerra Ace-Matic, using the official Belgian Dutch fault sheet. Do not apply this table automatically to an older Avanta, Tzerra or Calenta without the same model designation.
Common displayed codes
| Code | Meaning within the reference above |
|---|---|
| E00.04 | Return sensor missing at startup |
| E00.05 | Return sensor short circuit |
| E00.06 | Return sensor disconnected during operation |
| E00.07 | Return temperature too high |
| E01.12 | Return temperature higher than flow |
| E01.17 | Persistent circulation fault |
| E01.20 | Flue gas temperature limit |
| E02.17 | Persistent electronic board communication fault |
| E04.01 | Flow sensor short circuit |
| E04.02 | Flow sensor disconnected |
| E04.06 | Critical flue gas temperature |
| E04.10 | Ignition failed after five automatic attempts |
| E04.12 | False flame signal during ignition |
| E04.13 | Fan rotor blocked |
| E04.17 | Gas valve control fault |
| E04.29 | Maximum number of resets reached |
Diagnosis before replacing a component
A code describes a detected condition, not necessarily its root cause. The professional may need to check circulation, sensor readings, electrical supply, wiring, ignition or combustion according to the appliance. Do not bridge a safety device, adjust a gas valve or repeatedly reset a boiler in lockout.
Servicing, repairs and quotations
Routine servicing, statutory inspection and fault repair are different scopes. We explain the proposed work and known costs before additional work. Parts must match the appliance reference; availability may affect the timing. After a repair, the relevant functions and safety conditions are checked.
Prepare your visit in Anderlecht
Make the boiler accessible, keep previous reports available and mention shared plant-room access. View our indicative prices and contact us to confirm availability. Mentioning a brand does not imply that ChauffePro is an official representative of the manufacturer.