ChauffePro · Anderlecht 1070

Junkers / Bosch boiler service in Anderlecht

ChauffePro assesses Junkers / Bosch boiler faults, servicing and repair requests in Anderlecht. The exact model, installation condition and compatible parts determine the work required.

Call 0499 00 84 10Request advice or a quote
Junkers / Bosch boiler service in Anderlecht

Identify the appliance before interpreting a fault

Photograph the accessible identification label and display without opening the casing. Provide the model, product reference, full fault message and what still works: heating, hot water or neither. Tell us when the fault occurs and whether it followed an interruption or earlier work.

Fault-code reference and model limits

Older Ceranorm ZWN 24-6 AE and ZSN 24-6 AE, Belgian manual 6 720 612 061 (2006), page 35. This table must not be applied indiscriminately to recent Condens appliances.

Common displayed codes

CodeMeaning within the reference above
A7Domestic hot water temperature sensor fault on ZWN
A8CAN communication interrupted
AAPlate heat exchanger scaling during hot water draw on ZWN
C1Expected fan speed not reached
C4Pressure switch closed while off
C6Pressure switch does not close
C7Fan speed feedback not recognised
E2Abnormal flow temperature measurement
E9Flow thermal protection triggered
EAIgnition without an ionisation signal
F0Internal control fault
F7Flame signal while off
FAFlame signal after gas shut-off
Bosch fault lists also use subcodes. For the Bosch-4 list from 2013, EA 227 relates to no flame and EA 229 to ionisation loss in operation. In the 7000i list from 2017, E9 224 concerns thermal protections or the differential pressure switch. Record both parts; these references are not interchangeable.

Diagnosis before replacing a component

A code describes a detected condition, not necessarily its root cause. The professional may need to check circulation, sensor readings, electrical supply, wiring, ignition or combustion according to the appliance. Do not bridge a safety device, adjust a gas valve or repeatedly reset a boiler in lockout.

Servicing, repairs and quotations

Routine servicing, statutory inspection and fault repair are different scopes. We explain the proposed work and known costs before additional work. Parts must match the appliance reference; availability may affect the timing. After a repair, the relevant functions and safety conditions are checked.

Prepare your visit in Anderlecht

Make the boiler accessible, keep previous reports available and mention shared plant-room access. View our indicative prices and contact us to confirm availability. Mentioning a brand does not imply that ChauffePro is an official representative of the manufacturer.

Manufacturer reference documents