ChauffePro · Anderlecht 1070

Buderus boiler service in Anderlecht

ChauffePro assesses Buderus boiler faults, servicing and repair requests in Anderlecht. The exact model, installation condition and compatible parts determine the work required.

Call 0499 00 84 10Request advice or a quote
Buderus boiler service in Anderlecht

Identify the appliance before interpreting a fault

Photograph the accessible identification label and display without opening the casing. Provide the model, product reference, full fault message and what still works: heating, hot water or neither. Tell us when the fault occurs and whether it followed an interruption or earlier work.

Fault-code reference and model limits

Logamax plus GB172-24 / 24K, Belgian manual 6 720 647 786, February 2011, pages 61–63. This is not a code table for the GB172i or GB172i.2.

Common displayed codes

CodeMeaning within the reference above
2Y 281No pressure difference detected from the pump
3A 264Fan stops during operation
3C 217Fan not running
3L 214Fan stops during the safety time
3P 216Fan speed too low
3Y 215Fan speed too high
4C 224Boiler block or flue thermal protection
4U 222Flow sensor short circuit
4Y 223Flow sensor open circuit
6A 227No flame during ignition
6L 229Ionisation loss during operation
6C 228Flame signal with burner off
6C 306Flame signal after gas shut-off
The main code and numerical subcode both matter. A pump, fan or ignition-related message requires checks of the associated supply, wiring, measurements and operating conditions before a component is condemned.

Diagnosis before replacing a component

A code describes a detected condition, not necessarily its root cause. The professional may need to check circulation, sensor readings, electrical supply, wiring, ignition or combustion according to the appliance. Do not bridge a safety device, adjust a gas valve or repeatedly reset a boiler in lockout.

Servicing, repairs and quotations

Routine servicing, statutory inspection and fault repair are different scopes. We explain the proposed work and known costs before additional work. Parts must match the appliance reference; availability may affect the timing. After a repair, the relevant functions and safety conditions are checked.

Prepare your visit in Anderlecht

Make the boiler accessible, keep previous reports available and mention shared plant-room access. View our indicative prices and contact us to confirm availability. Mentioning a brand does not imply that ChauffePro is an official representative of the manufacturer.

Manufacturer reference documents